Publicidad
Idiomas disponibles
Idiomas disponibles
Using the iBT 10 with neck loop Listening
the music / TV, Making / Receiving Calls
- Paired the iBT10 with your smart device.
- Switch your hearing aid to T mode.
- Insert the neck loop 2.5mm leads into the Neck
Loop Port
iBT10 Bluetooth Device, then place the loop
around your neck.
- Now you can listen the music from your smart
device. You are ready to speak through your
iBT10 if it is paired with your smart phone.
- Buttons and controls are the same as we
described above.
Microphone
The iBT10 is built with an internal microphone which
enables you to make/receive calls when you use
neck loop system.
NOTE : The connectors (leads) of neck loop will
release if the unit gets entangled with the cables,
so as to avoid injury to the neck. If this happens,
plug back the connector in the jack to resume
normal operation.
USING WITH NECK LOOP
[
]
18
found on the top of the
Publicidad
