Publicidad
Idiomas disponibles
Idiomas disponibles
Theoperation ofany
lawn mower canresult
inforeign o bjects t hrown
intotheeyes, which can
result insevere e yedam-
age° A lways w ear s afety g lasses oreye
shields w hile operating your l awn mower
orperforming any
adjustments or repairs
We recommend a standard safety glasses
or wide vision safety mask worn over
spectacles,.
HOW TO USE YOUR
LAWN
MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
_,CAUTION:
Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the
risk of blade contact inju_. Do not under
any circumstances
attempt to defeat the
function of the operator control.. The blade
turns when the engine is running.
- "(our lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the fawn mower handle to start
and operate the lawn mower
TO OPERATE DRIVE SYSTEM
•
To start forward motion, lift drive con-
trol bar up to handle
•
To stop forward motion, release drive
control bare
IMPORTANT:
Always keep drive control
fully engaged against handle when in use
Operator
presence
control bar
DRIVE CONTROL
ENGAGED
DRIVE CONTROL DISENGAGED
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower wheels
for high cut, adjust cutting height to suit
your requirements,. Medium position is
best for most lawns..
•
To change cutting height, squeeze ad-
juster lever toward wheel.. Move wheel
up or down to suit your requirements. Be
sure all wheels are in the same setting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever..
Aiso, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs..
LEVER BACKWARD
Plate tab
TO LOWER MOWER
LEVER FORWARD TO RAISE MOWER Lever
Publicidad
