Bosch NITP666SUC Manual De Uso Y Cuidado página 14

Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
• , CAUTION
@
@
@
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
1. Select the desired element and power level.
2. Touch the Timer key twice. The nn LaLa,min and __
indicators light up on the timer display. The cook time
indicator for the desired element lights up.
PanelLock Timer 0 t
•
2 3 '
3. Within the next 10 seconds, set the required time
using the number keys 1 to 9.
! mm "-
Panel Lock Timer 0 1
_ Off _Flex On_
3
After a few seconds, the timer will start to count down.
The last programmed cook time will appear in the
display.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator n n
La.Laappears
in the element display and the timer display shows nn
/,.J/_a,
Once you touch the Timer key, the indicators and the
beep are turned off.
Changing or cancelling cook time
1. Select the desired element.
2. Touch the Timer key twice. The -.___ indicators light
up.
3. Adjust the cook time using the number keys. To
cancel cook time set the timer to LaLaby touching
the 0 key twice.
Notes
@ If a cook time has been set the display always shows
the time for this function. To check the remaining cook
time for an element, select the element and touch the
Timer key twice.
@ If a cook time has been set for more than one element,
the display shows the time for the selected element.
@ You can set a cook time of up to 99 minutes.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to LaLa.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off an element.
Setting the kitchen timer
1. Touch the Timer key. ,-_n
,..,_,
appears in the timer display.
The __, min and L_ indicators light up.
2. Set the required time using the number keys 0 to 9.
After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
Once the time has elapsed
A beep sounds. ,-_n LaLa and L_ indicators light up. Touch the
Timer key. The indicators go out and the beep stops.
Changing the time
Touch the Timer key. The __ and L_ indicators light up.
Change the time using the number keys 0 to 9.
14