Important safeguards for all Electrical appliances
Fully unwind the power cord before use.
Connect only to 220- 240V power outlet.
Do not let the power cord hang over the edge of a bench or table, touch not
surfaces or become knotted.
To protect against electric shock. Do not immerse the power cord, power plug or
appliance in water or any other liquid or allow moisture to come in contact with
the part. Unless it is recommended in the cleaning instructions.
It is recommended to regularly inspect the appliance. to avoid a hazard, do not
use the appliance if power cord, power plug or appliance becomes damaged in
any way. return the entire appliance to the nearest authorized service center for
examination and repair.
This appliance is for household use only. Do not use this appliance for anything
other than its intended use. do not use in moving vehicles or boats. Do not use
outdoors. misuse may cause injury.
The installation of a residual current device (safety switch) is recommended to
provide additional safety protection when using electrical appliances. it is
advisable that a safety switch with a rated residual operating current not
exceeding 30mA be installed in the electrical circuit supplying the appliance. See
your electrician for professional advice.
Always turn the appliance to the 'OFF' position, switch off at the power outlet,
unplug at the power outlet and remove the power cord, if detachable, from the
appliance and allow all parts to cool.
Do not place this appliance on or near a heat source, such as hot plate, oven or
heaters.
Position the appliance at a minimum distance of 20cm away from walls, curtains
and other heat or steam sensitive materials and provide adequate space above
and on all sides for air circulation.