Thulos TH-VI280 Manual De Instrucciones página 14

PARTS
Using your garment steamer
Before first use
Remove any sticker or protective cover from the steam head.
Unwind and straighten the cord before use.
When operating the garment steamer for the first time, allow it to steam for a few
minutes. this will remove any impurities and odours that might have been left by the
manufacturing process.
When operating the garment steamer for the first time, you may want to try the
steamer on an old piece of fabric before steamer on an old piece of fabric before
steaming your garment.
Warning: to avoid an electrical circuit overload, it is recommended that no other
appliances are plugged into the same circuit as your garment steamer when it is in
use.
Note: when unpacking the garment steamer, check to see you have received all the
items listed in the parts list, before discarding the packaging.
Assembling/operating your garment steamer
1. Press the water tank release button, pull out the water tank, open the water inlet
cover and fill destillated water into the water tank until it reaches the MAXIMUM
level (see flg.1) always ensure the water tank is at least a third full. Do not exceed
the MAXIMUM level when filling the water tank. Put back the water tank.
2. Hold the appliance with your hand positioned safely at the neck of the garment
1. 280ml Water tank
(removable)
2. Water tank release
button.
3. Steam button.
4. Steam lock switch.
5. Steam head.
6. Fabric
(removable)
7. Lint
(removable)
8. Power button with
power indicator light.
9. Cord guard.
brush
brush