CASO DESIGN 3370 Manual Del Usuario página 67


Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.

After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.

Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
►
button Micro + Convection.
Button presses
15.15 "Multi-stage Cooking" Mode
In this mode you can program up to up to three automatic cooking sequences. The
sequence and duration of defrosting, microwave cooking and grilling or hot air mode is
adjustable. The example below describes the settings for a multi-stage cooking program in
the sequence:
 Defrost
 Microwave cook
 Grill or hot-air cooking (without preheating function)

Turn the Time/Menu knob anticlockwise in order to select the
„Automatic Defrosting" program (09).

Select input mode by pressing the button Time/Weight once.
 Setting the defrost time
Set the new defrosting time by turning the Time/Menu control dial until the
defrosting time you require is displayed.
Setting the temperature
Starting the cooking programme
End of the cooking programme
Please note
You can check the hot air temperature during cooking by pressing the
Display
1
2
3
4
Selecting Automatic Defrosting
Activating input mode
Temperature
110
140
170
200
110 °C
140 °C
170 °C
200 °C
67