Publicidad
Idiomas disponibles
Idiomas disponibles
FISH MARKETING
GB
NovaVac PRO 310
profibrand
HOW TO USE WITH VACUUM BOTTLE STOPPERS
profibrand
NovaVac PRO 310
can vacuum bottle with bottle stoppers. If you
cannot finish a bottle of wine at one time, or you need to preserve a bottle of non-car-
bonic acid drink, edible oil, a bottle of juice or any liquid else that is stored in a bottle, you
NovaVac PRO 310
can use the
profibrand
to vacuum the bottle with a bottle
stopper.
1. Plug the vacuum bottle stopper to the bottle. Please allow at least 2.5cm distance
between the bottom of the stopper and the surface of the liquid.
2. Connect the hose to the accessory port of the machine and the other end to the
port of the bottle stopper.
3. Press "Accessory" button, the machine starts to vacuum.
** Press On/Off button to stop the machine's all working processes.
4. After the vacuum cycle is complete, the machine will stop automatically. Remove the
hose from the stopper.
5. Put the bottle vertically in a plane surface. Make sure the liquid does not touch the
stopper.
6. Simply remove the stopper if you want to open the bottle.
.
HOW TO IMPULSE SEAL
Sometimes things do not need to vacuum seal, they only need to seal. So Impulse Seal
mode is added in this machine. When enter into the Impulse Seal mode, you don't need to
press any button but only open and close the lid to seal the bag.
1. Press "+""-"button to set the seal time;
2. Press Impulse Seal button, the Impulse Seal light is on. The machine enters into Im-
pulse Seal mode (if the lid is close, LED shows C; if the lid is open, LED blinkingly shows the
seal time);
3. Put the bag mouth across the seal wire and into the chamber. Close and press the
lid, the machine detects that the lid is close then enter into Seal mode. The digits in LED
counts down from preset seal time to 0. The machine will release air and lid, then beep
when the process is finished.
** Press On/Off button to stop the machine's all working processes. **
4. Open the lid, take out the bag and check if the sealing is good.
5. Repeat the above 3 and 4 to seal other bags. Or press On/Off button to exit this
mode.
(Note: If many bags need to be Impulse Seal, adjust/shorten the seal time when needed to
avoid overheated or melting the bag)
24
Publicidad
