Publicidad
Idiomas disponibles
Idiomas disponibles
1. To switch on the sander, press the "ON/OFF" switch (2)
from position 0 to I;
2. To switch off the sander, press the "ON/OFF" switch from
position I to 0.
1. Place the entire surface of the sanding sheet over the
material;
2. Switch on the orbital delta sander and move it with some
pressure over the workpiece, making transversal and
linear movements;
3. Use coarse sandpaper for material removal and fine
sandpaper for finishing. To decide the best type of
sandpaper to use, perform tests before using it on the
final product.
Dust formed while the equipment is in use can be
hazardous to health:
▪ Always wear goggles and a dust mask when sanding;
▪ All persons working with the sander or entering the
workspace must wear a dust mask to protect themselves
from the effects of sanding;
▪ Eating, drinking and smoking are forbidden while
operating the sander;
▪ This sander is suitable for sanding wood, iron, plastic
and similar materials;
▪ It is prohibited to use this sander on plaster and surfaces
with lead paint.
Before carrying out any cleaning, adjustment, accessory
replacement, repair or maintenance work, remove the
battery pack.
The orbital delta sander does not require any additional
lubrication or maintenance. However, you must perform
regular cleaning for a continuous and trouble-free
operation.
Cleaning
After each use, clean all the components of the orbital delta
sander. Clean the orbital delta sander with a clean, damp
cloth and blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept
unclogged to prevent motor overheating. Clean ventilation
slots regularly or whenever they become blocked.
Storage
When not in use, store the orbital delta sander in a dry,
clean place, free of corrosive smoke and out of children's
reach. Remove the battery when storing it.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
