Publicidad
Idiomas disponibles
Idiomas disponibles
Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater the
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial).
Important: Press and buons at the same time,then press the power button
parameter value is 0, it will start with zero. When parameter value is 1, it will start with non-zero.
(Zero start: When starting, the E-scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the scooter is static press the accelerator and the E-scooter does not
work, push the e-scooter manually to start driving , the E-scooter works. factory default is non-zero
start. )
You have to manually move the E-scooter with your foot before the accelerator handle are working.
9. Operation Guide
1
Press Speed up Button and Speed down Button to adjust speed level
2 Press the accelerator button to accelerate, so you can drive
3 Press brake button to brake
4 Press the accelerator and electric brake button at the same time, the scooter will automatically
brake;
5
For safety , the rear wheel brake system must be used when driving at high speed.
6
When driving at night, please press the headlight switch button to turn on the headlight.
Headlight Switch
Rear Brake
and select 04 mode, when
Publicidad
