Lemeks Palmako PA28-3030 Instrucciones De Montaje, Instalación Y Mantenimiento página 29

Installation manual – English
ATTENTION:
After the first layer of logs, measure the
diagonal lengths and, if necessary, re-install the logs. Only if
the diagonal lengths are completely equal is the base
frame rectangular and you can mutually attach the logs.
Continue the installation of the walls by strongly forcing the wall logs into one another. If necessary, use
the hitting block and hammer. At the same time, do not forget to begin the installation of the door and
windows. You should definitely begin the door installation after the 5
Door and window
Doorframe:
➢ If it is a double door, the
doorframe is supplied in separate
parts due to
requirements and you will have to
begin by assembling it.
➢ To do this, place together the 4
parts of the frame and screw
them onto one another.
➢ Make sure that the part of the
frame with the deeper notch is
installed upwards. The lateral
jamb parts have hinges and are
mirrored.
➢ It is recommended to install the
leaves later.
➢ If it is a single door, its frame and
leaf are supplied
assembled.
Doorframe installation (Only necessary for a double door!):
transportation
already
-6 layer of logs.
th th