R
7. Cooling system
The MPK-215R has a cooling system that allows it to perform a large number of
consecutive tests without activating the thermal protection. Under normal
environmental conditions you can perform up to 30 consecutive tests with duration
of 1 minute and 1 minute interval. This interval is usually used for repositioning the
test lead in another test point.
The cooling system filter must be replaced periodically. Changing the filter can be
easily performed. Pull the grid up, replace the filter and place the grid again in the
panel.
The lack of filter maintenance can decrease the cooling efficiency and thus the
amount of consecutive tests.
You should use only filters supplied by MEGABRAS.
19