For the other settings under Time/Date, press 12 w/s 3 buttons to select from the following options
and then press the SELECT button to confirm.
Auto update
Set format
Set timezone
Daylight savings
Standby Clock
The default auto time update setting is "Update from Network". If you would like to
manually set the time, it is recommended to turn the Auto update function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode.
1. While in System settings, press 12 w/s 3 buttons to select Inactive Standby and press SELECT
button to confirm.
2. Press 12 w/s 3 buttons to select between Off, 2 hours, 4 hours, 5 hours and 6 hours. Press
SELECT button to confirm.
Language
1. While in System settings, press 12 w/s 3 buttons to select Language and then press the SELECT
button to confirm.
2. Press 12 w/s 3 buttons to change the display language of your choice.
3. Press the SELECT button to confirm.
Factory Reset
Factory reset would be recommended when experiencing issues with radio reception, moving houses,
moving to a different part of the country, when the Humboldt may pick up the local and national DAB
stations in that area, therefore previously tuned channels may no longer be available.
●
To access the Factory reset, press MENU – go to 'System settings' .
●
While in 'System settings' , press 12 w/s 3 buttons to select Factory Reset. Press the SELECT
button to confirm.
●
Press 7 / 8 buttons to select [Yes]. Press the SELECT button to confirm or select [No] to cancel.
After the system reset, all the tuned stations, Internet, DAB & FM preset stations will be erased.
EN
DAB/FM/Network/No update
12 / 24 hour format.
Select a time zone. (Only available when Auto update from Network is on.)
Select daylight savings. (Only available when Auto update from Network is
on.)
Analog Clock/ Digital Clock
Instructions Guide
13