MAJORITY Humboldt Manual De Instrucciones página 28

Instructions Guide
Using headphones
Do not listen to music at high volume when using headphones. Doing so can cause permanent hearing
impairment. Turn the tuner volume level to the lowest before using headphones.
> Only use headphones with a 3.5 mm jack plug.
> Insert the headphone connector in the headphone socket in front of the unit.
Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme
volume when using earphones, especially for extended periods of time.
Sleep Setting
This function allows you to program the unit to turn to standby mode by itself after a set period of
time.
1. To activate the sleep function, press the SLEEP button on remote control repeatedly. The time will
change in the below sequence on every press:
Sleep OFF  15 minutes  30 minutes  45 minutes  60 minutes  90 minutes  120 minutes
2. When your desired sleep time appears on the unit display, release the button. The sleep function
will be activated in just two seconds. "
The remaining time until switching to Standby Mode, is also displayed next to the symbol "
the unit screen.
3. When the sleep timer counts down to zero, the unit will turn to standby mode. To turn the sleep
function off while the sleep timer is still counting down, press the SLEEP button repeatedly to
select "SLEEP OFF".
Alternatively,
1. Press the MENU button on the remote control to display the function main menu. Press 12
w/s 3 buttons to select Main menu, and then press the SELECT button to confirm.
2. Press 12 w/s 3 buttons to select Sleep, and then press the SELECT button to confirm.
3. Press 12 w/s 3 buttons to select sleep timer, and then press the SELECT button to
confirm.
28
EN
" will appear on the display.
" on