MAJORITY Humboldt Manual De Instrucciones página 29

Setting the Alarm
1. Press TIMER button on the remote control, the display shows "Alarm (1 or 2): Off [hh:mm]".
2. Press 12 w/s 3 buttons to select the Alarm number (1 or 2) and then press the SELECT button to
start the setting of the following parameters.
Press 12 w/s 3 buttons to select then press the SELECT button to confirm
Enable
Time
Mode
Preset
Volume
Save
3. Finally, select "Save" and press the SELECT button to save the alarm setting. The display will show
Alarm Saved. When the alarm is set, the alarm icon will apear on the display.
4. To turn off the alarm when it sounds, press the q/VOLUME dial on unit or q button on remote
control, or ALARM button on remote control
Cancelling the Alarm
1. Press TIMER button on the remote control, the display shows "Alarm (1 or 2): On [hh:mm]".
2. Press the 12 w/s 3 buttons to select the Alarm number (1 or 2) and then press SELECT button to
start the setting of the timer.
3. Press the 12 w/s 3 buttons to select "Enable" then press the SELECT button to confirm.
4. Press the 12 w/s 3 buttons to select "Off" then press the SELECT button to confirm.
5. Finally, select "Save" and press the SELECT button to save the setting.
6. Alternatively, during Standby mode, press the TIMER button on remote control repeatedly can
turn the saved Alarm 1/2 on/off sequentially.
If no button is pressed within approx. 30 seconds, the unit exits timer setting mode
automatically.
EN
Off/ Daily/ Once/ Weekends/ Weekdays
(Alarm On time)
Buzz/ Internet radio/ DAB/ FM /CD /USB
Last Listened/ (Preset station)
0-32
Save and confirm the alarm setting
Instructions Guide
29