MAJORITY Humboldt Manual De Instrucciones página 21

FM Operation
Press MODE button on unit or remote control to access Mode Menu. Turn
the TUNING/SELECT dial on unit or press 7 / 8 buttons on remote
control to select FM Radio mode, then press TUNING/SELECT dial on unit
or SELECT button on remote control to confirm.
The display will show the frequency.
Auto Scan
- Press the SCAN/12 button on unit or SCAN button on remote control to start searching for a
station. Once a station has been found, the scanning will stop automatically.
Alternatively,
- Press and hold 12 w/s 3 buttons to start searching for a staion.
The search may not stop at a station with a very weak signal
Manual Tuning
To search for FM stations manually, turn the TUNING/SELECT dial on unit or press 7 / 8 buttons on
remote control repeatedly until your desired frequency is reached.
With FM radio, it may be necessary to fine tune each station by turning the TUNING/SELECT
dial on unit or pressing 7 / 8 buttons on remote control repeatedly. Each press will adjust the
frequency by 0.05 MHz. If reception is still poor, adjust the position of the aerial or try moving
the radio to another location.
FM Display Modes
Every time you press the INFO button on the unit or remote control , the display will show the
following display modes: Radio Text – Programme Type – Frequency – Date
RDS Radio Text
This is a scrolling message information about the current programme.
Programme Type
This describes the "Style" or "Genre" of music that is being broadcast.
Station Name / Frequency
When an RDS station is received, the name of that station will be displayed, or if not the frequency will
be displayed.
EN
Instructions Guide
21