Battery Maintenance - Gima SPOT-CHECK PC-300 Guía De Uso

in the specific instruction or contract our company directly. After each maintenance or the
yearly maintenance, the monitor can be thoroughly inspected by qualified personnel, including
function and safety examinations.
 If the hospital fails to carry out a satisfactory maintenance program about the monitor,
it may be disabled and cause harm to the patient.
 If there is any indication of cable and transducer damage or they deteriorate, they are
prohibited from any further use.
 The SpO function has been adjusted before selling. So it is unnecessary to adjust again.
2
If the user need to adjust SpO
FLUKE INDEX2.
 The adjustable units in the monitor such as potentiometer are not allowed to adjust without
permission to avoid unnecessary failures that affect normal application.
 It's recommended to use the battery once a month to ensure its strong power supply
capacity and long service life, and recharge it after run out of the power volume.

7.1.3 Battery Maintenance

 Please pay attention to the polarity of battery, do NOT insert it into battery compartment
with reversed polarities.
 Do NOT use the battery manufactured by other companies, if being inserted, the device
may be damaged.
 In order to avoid damaging the battery, do NOT use other power supply device to charge
the battery.
 After battery aging phenomenon occurring, do NOT throw the battery into fire to avoid
explosion risk.
ENGLISH
during using, please adjust by using the simulator mode
2
102