73
2.3.3 Temperature Measurement
The infrared temperature probe is a delicate transducer. Please follow the steps and
procedures in operation. Failure to operate it may cause damage to the probes.
1. The infrared temperature probe
Please place the infrared temperature probe to a stable ambient temperature for 30min before
measuring. If the patient sweats, please wipe the sweat. Please begin to take measurement
when the temperature is stable.
Measuring tip
of temperature probe
Cover of measuring tip
Battery
cover
Figure 2.7A the infrared temperature probe
Operation procedure:
1. Connect the infrared temperature probe to the connector on the upper side of device
Measuring
key
Display screen
Power on/off key
ENGLISH
The whole
display screen
Figure 2.7B