Pando PVMB 15-7CR Manual De Uso E Instalación página 174

EN
First ignition
When the unit is first plugged in, it will automatically turn on at the default settings. The factory
preset temperature is 12°C (54°F).
1. Touch the setting dial until the temperature you want to set flashes. You can then use the
UP and DOWN keys to set the desired indoor temperature. When you touch either key for
the first time, the display will show the last previously set temperature.
2. The temperature will increase by 1°C/1°F if you touch the UP key once, or the temperature
will decrease by 1°C/1°F if you touch the DOWN key once. The display flashes while
making the adjustment.
3. The set temperature will temporarily flash on the display for 5 seconds after the
temperature has been set. The display will then return to the current indoor temperature.
4. To view the set temperature at any time, touch the setting selector key, the set
temperature will temporarily flash on the display for 5 seconds. The display will then return
to the current indoor temperature.
DOUBLE DISPLAY ZONE
TURNING ON
until it turns off. To turn the wine cooler on, gently touch and hold the key for 1 second until
it turns on.
temperature.
LIGHTUsed to switch the internal light on/off.
RISEUsed to increase the temperature
LOWERUsed to lower the temperature set at
To turn the wine cooler off, gently touch and hold the key for 5 seconds
Pando
Pando Pando
by 1°C. .
.
171
Integralcooking Integralcooking