Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Ice
Refrigerator is
leaking water
Ice forms in inlet
tube to ice maker
Water flow is
slower than normal
• Plastic tubing was used to complete
water connection.
• Improper saddle valve was installed.
• Water pressure is too low.
• Freezer temperature is too high.
• Water pressure is too low.
• Improper saddle valve was installed.
• Copper tubing has kinks.
• Water filter is clogged or needs to be
changed.
The manufacturer recommends using copper tubing
for installation. Plastic is less durable and can cause
leakage. Sears is not responsible
for property
damage due to improper installation or water
connection.
Check water connection procedure (see page 13].
Self-piercing and 3/,6" saddle valves cause low water
pressure and may clog the line over time. Sears is
not responsible for property damage due to
improper installation or water connection.
Water pressure must be between 35 to 100 pounds
per square inch (psi] to function properly. A
minimum pressure of 35 psi is recommended for
refrigerators with water filters.
Adjust freezer control (see pages 15-16]. Freezer is
recommended to be approximately 0° F (-18° C].
Water pressure must be between 35 to 100 psi to
function properly. A minimum pressure of 35 psi is
recommended for refrigerators with water filters.
Check water connection procedure in your
Installation Instructions. Self-piercing and _,_"
saddle valves cause low water pressure and may
clog the line over time. Sears is not responsible
for property damage due to improper
installation or water connection.
Open water
valve completely and check for leaks.
Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
Change water filter (see page 20].
33
Publicidad
