Puritan Bennett Breeze SleepGear Manual Del Usuario página 14

Cleaning
E n g l i s h
14
4. Remove the vent hole insert from the Nasal Pillows shell or the
DreamSeal shell. Slide your fingernail under the end of the insert
with the raised indicator dot(s) and pull the insert up and out.
Note: It is recommended that you confirm that you have the
correct vent insert. The Nasal Pillows vent hole insert
features two raised indicator dots, while the DreamSeal
vent hole insert has a single raised indicator dot.
Caution: Do not immerse components with foam pads
attached. Do not sterilize. Do not use bleach-,
chlorine-, or aromatic-based solutions, scented oils,
or moisturizing, antibacterial, deodorizing, or
fragranced soaps to clean the nasal pillows, mask,
headgear, padding, or air tubing. Use of such
substances may cause hardening of your Breeze
SleepGear, thereby reducing the life of the product.
Caution: Do not expose the mask or tubing to direct sunlight.
Exposure to direct sunlight may cause deterioration
of the product.
5. Wash the nasal airway assembly parts in warm, soapy water as
necessary to remove dirt, body oils, cosmetics, etc. Rinse them
thoroughly in clean running water and air dry on a clean,
absorbent surface. Foam pads may be wiped with a mild soap
applied to a moist cloth.
6. To install the vent hole insert, align the indicator dot(s) on the
insert with the single dot on the shell. Press the vent hole insert
into the opening in the shell. Make sure the inner lip on the vent
hole insert is fully inserted into the shell.
Breeze SleepGear