asalvo DICKENS 20437 Manual De Instrucciones página 23

Connect the ISOFIX on both
sides to the corresponding on
the car seat.
Press and hold the support
leg adjustment button, and
naturally extend the support
leg to a height that can touch
the ground.
Open the buckle: press the red
button on the safety lock.
Green
Red
Confirm that the connection
indicator on the ISOFIX
interface shows green, (if its still
be red need to be reinstalled).
To keep the plane of the lower
end of the support leg level
with the floor of the vehicle,
the support compression will
display green.
Carry the child into the safety
seat and fix it with a five-point
harness belt and tighten it.
INSTRUCTIONS
Push the safety seat to the
tightest, so that the length of
the ISOFIX mechanism is the
shortest. Shake the seat to
check if it is firmly installed.
Pull the adjustment buttons
of the support leg to adjust
the length of the support leg.
Release the button, there will
be a "click" sound to indicate
the lock.
Note: The angle of the support
leg cannot exceed 90° . Can
not be supported on the raised
ground.
Pull the adjustment belt forward
to tighten the five-point harness.
EN
23