Vortice VORT INVISIBLE MINI Manual De Instrucciones página 54

ENGLISH
12.3.6 "Setting speed Menu" Page
From "Installer menu" page, you can select "Speed", in order to join to "Setting speed". Pressing the [] key will
display:
VI1
VO1
Å
VI2
VO2
VHI
VHO
Motor speed can be adjusted depending on the system flow rates, selecting:
VI = Fresh air intake from outside
VI1 = min speed 1
VI2 = max speed 2
VO= Stale air outlet to outside
VO1 = min speed 1
VO2 = min speed 2
VHI = Holiday mode speed for the delivery of clean air into the house
VHO = Holiday mode speed for the delivery of stale air to the outside
12.3.7 "Alarms" page
Access the "ALARM" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filters checking
• Alarm: Filters replacing
• Alarm: No Frost - Wait one hour
• Alarm: Ext probe damaged
• Alarm: Int probe damaged
• Alarm: Exh probe damaged
• Alarm: Pipe
Alarm with machine lock: On the "HOME" page, are alternated shown the words "Alarm!" And "Block!".
Alarm without blocking the machine: on the "HOME" page, the message "Alarm!" Appears.
In the presence of alarms: select the "ALARM" line on the "MAIN MENU" page and press the [] key .
A new descriptive page shows the specific alarm text and troubleshooting instructions.
a
After 2 minutes with no keys being pressed, the display returns to the "Home" page without
saving any changes.
12.3.8 Pre-alarm: "Filters checking"
After the preset time has elapsed, "Alarm" appears in "HOME" and the note "Check clean filter" in the "Alarms"
54
SPEED
without blocking the machine;
without blocking the machine;
occurs with the machine lock;
without blocking the machine (No Frost, By-pass: not enabled);
without blocking the machine ("By-pass" not enabled);
without blocking the machine (No Frost not enabled);
occurs with the machine lock;
MAIN MENU
USE MENU
ALARM
SETUP
INFO
[ ▲ ]
VO1
040
[ ▲ ]
9 9
[ ]
[ ▲ ]