Descargar Imprimir esta página

Lifetime 91208 Instrucciones De Ensamblaje página 90

Publicidad

MAINTENANCE INSTRUCTIONS
If routine checks and maintenance procedures are not done, the equipment could overturn and/or
become a hazard.
At the beginning of each play season:
• Tighten all hardware.
• Lubricate all metallic moving parts.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked
or missing.
• Check all moving parts including swing seats, ropes, cables and chains for wear, rust or other
deterioration. Contact customer service for replacement parts.
• Check metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting the
requirements of 16 CFR 1303.
• Reinstall any plastic parts, such as swing seats or any other items that have been removed for the
cold season.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary. (See page 7)
Twice a month during play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or
missing.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary. (See page 7)
Once a month during play season:
• Lubricate all metallic moving parts.
• Check all moving parts including swing seats, ropes, cables and chains for wear, rust or other
deterioration. Contact customer service for replacement parts.
At the end of each play season or when the temperature drops below 40
• Remove plastic swing seats and other items and take them indoors or do not use.
• Rake and check depth of loose-fi ll protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary. (See page 7)
• If the warning sticker is illegible, destroyed, or removed, contact the Customer Service Department
at 1-800-225-3865 for a replacement.
Disposal Instructions:
Disassemble and dispose of the playground equipment in such a way that no
unreasonable hazards will exist at the time the equipment is discarded. Follow all local disposal
requirements.
o
F (5
86
o
C):

Publicidad

loading