Wall Assembly; Product Installation - Fracarro FRPRO 10 Instrucciones De Funcionamiento

3.1 WALL ASSEMBLY

Install the unit by means of the brackets integrated in the mechanic parts of the product. Please leave a gap
to connect the power supply cable and allow the ventilation (15 cm of gap on all sides).
Please refer to the following figures (Fig 3.1) to install the unit; other methods of installation can negatively
affect the operation of the unit.
15cm
Any other method of installation does not guarantee the duration of the product.

3. PRODUCT INSTALLATION

15cm
Fig 3.1 Correct installation
Fig 3.2 Wrong installation
32
Install the product horizontally on the wall
as shown in the figure; leave a minimum
gap of 15 cm around the unit to allow pro-
per ventilation.
3.2
The
rec
The
of t
In t
UH
10
Fur
ted
For
1.
2.
3.
4.
5.
6.
Alte
6) o
5.2