Publicidad
Idiomas disponibles
Idiomas disponibles
LOADING THE CONFIGURATION FILE
By means of a pen drive, a confi guration that was previously memorized or saved from a PC can be loaded
into the "CONTROL UNIT - UBS MEMORY".
When the display shows "insert USB," insert the pen drive and press the
scroll down the fi les within the pen drive and select the confi guration fi le that you want by pressing the
to load the confi guration into the Profi ler unit. A message will be displayed when the operation is complete.
It is possible to load the confi guration of any model of the FRPRO series; this way, all settings relevant to the
parameters of the destination model will be maintained (i.e. by loading the setting of an FRPRO10A unit into
an FRPRO10S unit, all settings will be copied except for the settings relevant to the SAT input).
Notes:
•
If the message "loading OK" is not displayed, repeat the procedure.
•
The Profi ler unit does not accept a fi le longer than 16 digits. If a longer fi le is uploaded, the Profi ler unit
will display the message "Loading error."
•
With a USB pen drive, it is possible to load a saved confi guration into any product of the Profi ler series.
SAVING THE CONFIGURATION FILE
To save a confi guration from the Profi ler unit to the pen drive, use the "SAVE AS" menu.
To save a confi guration from the Profi ler unit to the pen drive, use the "SAVE AS" menu.
When the message "insert USB" appears, insert the pen drive and press the
the name "Confi guration1." To change the fi le name, use the keyboard and the left/right arrows to move
the name "Confi guration1." To change the fi le name, use the keyboard and the left/right arrows to move
the name "Confi guration1." To change the fi le name, use the keyboard and the left/right arrows to move
along the letters (the entered letters can be cancelled by pressing the
Profi ler confi guration onto the pen drive.
Notes:
•
Accepted formatting for the pen drive: FAT-12, FAT-16, FAT-32 (MS-DOS).
•
The pen drive cannot have two or more partitions and/or a proprietary fi le system.
•
The confi guration fi les must be saved in the root (principal directory) of the disk (the Profi ler does not
allow access to the sub-folders).
•
The name of the confi guration fi le must not exceed 16 letters ( "cpr" extension not included)
•
Special symbols such as *, /, \, !, ... etc. are not accepted.
key). Press the
38
key. Use the DOWN arrow to
key. Use the DOWN arrow to
key, the Profi ler will propose
key to save the
key
Fro
AU
Publicidad
