Publicidad
Idiomas disponibles
Idiomas disponibles
Graphic indications of
the menu diagrams
the
and
ow-
From the initial menu, 5 sub-programming items are available:
CONTROL UNIT settings: the main functions of this menu are language selection, management of the ac-
cess PIN, loading/saving the fi le from the USB pen drive and resetting the unit to the factory settings.
INPUT settings: the main functions of this menu are the defi nition and programming of UHF clusters, setting
the B.III+DAB input gain, FM input gain, AUX auxiliary input gain and the gain and tilt of the SAT input (for
FRPRO10S only).
SELF-ALIGNMENT settings: the function of this menu is to enable the self-alignment of the gains in order to
automatically equalize the clusters, guaranteeing the best noise fi gure and the maximum output level.
Setting the FINAL GAIN: the function of this menu is to program the fi nal gain to increase/decrease the level
of all amplifi ed signals after the self-alignment.
Setting the REMOTE POWER SUPPLY: the function of this menu is to remotely manage UHF power supply
(independently) and select the satellite polarity (for FRPRO10S only).
Select the menu by using
Scroll the menu to the right
Scroll the menu upwards
Change the parameters by means of the UP
5.1 INITIAL MENU
Setting the headend
FRACARRO
CONTROL UNIT
FRPRO10
Enter PIN
Enter code
Setting the input
parameters and cluster
SELF-ALIGNING
Automatic settings of gain
self-aligment
FINAL GAIN
Manual setting of gain
SETTINGS
Power supply ON/OFF on
the UHF1-UHF2-UHF3
REMOTE POWER
inputs and LNB (for
FRPRO10S only)
Meaning
or
parameters
see page
SETUP
INPUT
see page
SETTINGS
see page
SETTINGS
see page
see page
SETTINGS
35
keys and exit with the
key
or to the left
or downwards
and/or DOWN arrows
36
39
43
43
44
Publicidad
