Publicidad
Idiomas disponibles
Idiomas disponibles
Do not, underanycircumstances, cut or removethe
third (ground)prongfrom the power cord,
Disconnect electrical supply cordfrom
wallreceptacle b efore servicing cooktop.
Preferred Method
Check
Operation
Refer to the Use and Care Guide packaged with the
cooktop for operating instructions and for care and
cleaning of your cooktop.
Do not touch the burners. They may be hot enough to
cause burns.
Grounding type
wall receptacle
not, under any
circumstances,
cut,
remove, or bypass
the grounding
prong,
Power supply cord with 3-
prong grounding plug.
Figure 9
Model
and
Serial
Number
Location
The serial plate is located on the underside of the
cooktop (see Figure 10).
When ordering parts for or making inquires about your
range, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
of your cooktop.
Your serial plate also tells you the rating of the burners,
the type of fuel and the pressure the cooktop was
adjusted for when it left the factory.
,
Install Burner Caps and Triple burner head
This cooktop is equipped with sealed burners.
A.
Unpack the burner grates.
B.
Regular Burners: Burner heads and burner caps
are already on the surface. Remove all tapes
from burner caps and verify if they are correctly
place on the burner heads.
C. Triple Burner (if equipped):
Remove all tapes
from burner cap. Remove the burner cap and
head. Remove and discard the packaging
material. Replace head and cap on the triple
burner. Be careful
not to damage
the
electrode
while
placing the head over the
orifice.
Make sure electrode fits correctly into
slot in burner head (see Figure 11).
D. Be sure that all the burner caps and the triple
burner head are correctly placed BEFOREusing
your cooktop.
Serial plate is
located under the
burner box.
Figure 10
Figure 11
NOTE: There are no burner adjustments necessary on
this cooktop.
Publicidad
