Best WPP1 Serie Manual De Instrucciones página 8

8. CONNECT WIRING
Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance with all applicable codes and stan-
dards. Before connecting wires, switch power off at service panel and lock service disconnecting means to prevent power from
being switched on accidentally.
1. Remove strain relief plate.
2. Install strain relief.
3. Insert the house wiring cable through the wire clamp and tighten the wire clamp screws to secure the cable.
4. Reinstall strain relief plate.
5. From inside the hood, remove electrical cover.
HD1535
WARNING
! !
VQ0010
8
HD1527
HD1528
HD1538