Statement 1006-Chassis Warning For Rack-Mounting And Servicing; Statement 1008-Class 1 Laser Product; Statement 1015-Battery Handling - Cisco Catalyst 9400 Serie Información De Seguridad

Regulatory Compliance and Safety Information Cisco Catalyst 9400 Series Switches
Statement 1006 Chassis Warning for Rack-Mounting
and Servicing
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
Statement 1008 Class 1 Laser Product
Warning
This product is a Class 1 laser product.
Statement 1015 Battery Handling
Warning
To reduce risk of fire, explosion, or leakage of flammable liquid or gas:
• Replace the battery only with the same or equivalent type recommended by the manufacturer.
• Do not dismantle, crush, puncture, use a sharp tool to remove, short the external contacts,
• Do not use if battery is warped or swollen.
• Do not store or use battery in a temperature > 60C.
• Do not store or use battery in low air pressure environment < 10.1 psia for air pressure at
with the heaviest component at the bottom of the rack.
servicing the unit in the rack.
or dispose of the battery in fire.
10,000 feet..
Regulatory Compliance and Safety Information - Cisco Catalyst 9400 Series Switches
5