Descargar Imprimir esta página

Craftsman 919.167784 Manual De Instrucciones página 10

Ocultar thumbs Ver también para 919.167784:

Publicidad

Idiomas disponibles

Idiomas disponibles

This unit is capable
of powering
the following
Accessories.
The accessories
are
available
through
the current Power and Hand Tool Catalog or full-line
Sears
stores.
Accessories
In Line Filter
Tire Air Chuck
Quick Connector
Sets (various
sizes)
Air Pressure Regulators
Oil Fog Lubricators
Air Hose: 1/4", 3/8" or 1/2" I.D. in
various lengths
Unpacking
Refer to the selection
chart located on
the unit to select the tools this unit is
capable
of powering.
The use of any
other accessory
not recommended
for use with this
tool could be hazardous.
Use only
accessories
rated equal to or higher
than the rating of the air compressor.
1.
Remove
unit from carton and dis-
card all packaging.
HOW TO SET UP YOUR UNIT
Location of the Air Compressor
Locate the air compressor
in a
clean, dry and well ventilated
area.
The air compressor
should
be
located
at least 12" (30.5 cm)
away from the wall or other
obstructions
that will interfere
with the flow of air.
Place the air compressor
on a flat
level surface
in the vertical
posi-
tion resting on the rubber bum-
pers and wheels
The air compressor
pump and
shroud
are designed
to allow for
proper cooling.
The ventilation
openings
on the compressor
are
necessary
to maintain
proper
operating
temperature.
Do not
place rags or other containers
on
or near these openings.
GROUNDING
INSTRUCTIONS
Risk of Electrical
Shock.
In the event
of a short circuit, grounding
reduces
the risk of shock by providing an
escape
wire for the electric
current.
This air compressor
must be
properly grounded.
The portable
air compressor
is
equipped
with a cord having a
grounding
wire with an appropriate
grounding
plug (see following
illustra-
tions).
1.
The cord set and plug with this
unit contains
a grounding
pin.
This plug MUST be used with a
grounded
outlet.
IMPORTANT:
The outlet being used
must be installed and grounded
in
accordance
with all local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as the
grounded
plug. DO NOT USE AN
ADAPTER.
See illustration.
N015838
10- ENG

Publicidad

loading