Descargar Imprimir esta página

Craftsman 919.167784 Manual De Instrucciones página 20

Ocultar thumbs Ver también para 919.167784:

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
Pressure
reading
on
the regulated
pressure
gauge drops
when an
accessory
is
used.
CAUSE
It is normal for "some"
pressure drop to occur.
Knocking
Noise.
Possible defect in safety
valve.
CORRECTION
If there is an excessive
amount of pressure drop when
the accessory
is used, adjust
the regulator
following
the
_nstructions
in the Description
of Operation
paragraph
in the
Operation
section.
NOTE: Adjust the regulated
pressure under flow
conditions
(while accessory
is
being used).
Operate safety valve manually
by pulling on ring.
If valve still
leaks, it should
be replaced.
Compressor
is not large
enough for air requirement.
Defective
check valve.
Remove
and clean, or replace.
Compressor
is
Prolonged
excessive
use of
Decrease amount
of air usage.
not supplying
air.
enough
air
to operate
accessories.
Hole in hose.
Check valve restricted.
Air leaks.
Restricted
air intake filter.
Damaged
regulator.
Regulator
knob has
continuous
air
leak.
Regulator
will
not shut off air
outlet.
Damaged
regulator.
Check the accessory
air
requirement.
If it is higher
than the SCFM or pressure
supplied
by your air
compressor,
you need a
larger compressor.
Check and replace if required.
Remove and clean, or replace.
Tighten fittings.
Clean or replace air intake
filter. Do not operate the
air compressor
with the
filter removed.
Refer to the
Air Filter paragraph
in the
Maintenance
section.
Replace.
Replace.
N015838
20- ENG

Publicidad

loading