Tennant IPC PW-H61 Manual De Instrucciones página 22

DESCRIPTION OF SYMBOLS
DO NOT DIRECT THE JET
AGAINST
MALS, POWER SOCKETS
OR THE MACHINE IT SELF.
ATTENTION:
BURNS.
ATTENTION:
ELECTRIC SHOCK.
EARTH
WATER INPUT
WATER OUTPUT.
SWITCHING OF THE PUMP
MOTOR.
LIGHTING THE BURNER /
TEMPERATURE
MENT.
FUEL (DIESEL)
CHEMICHALS
(DETERGENT).
ANTI-SCALE PRODUCT
DO NOT FEED WITH DRIN-
KING WATER.
USE AN EN 12729 TYPE BA
SYSTEM SEPARATOR.
20
PEOPLE, ANI-
- The electric connection must be
performed by qualified technicians who
RISK OF
are able to work in observance of the
governing rules (in compliance with the
provisions of the IEC 60364-1 standard)
RISK OF
and of the manufacturer's instructions.
A wrong electric connection may cause
damage to persons, animals or things,
and the manufacturer
considered responsible for these.
- The H.P. cleaners with power lower
than 3 kW are equipped with a plug for
connection to the electric supply.
In this case please check if the electric
power system and the electric sockets
are compatible with the max. power of
the appliance indicated on the plate.
(kW). In case of doubt, please apply to
qualified personnel.
If the socket and the plug of the
machine are not compatible, have the
ADJUST-
plug replaced with a suitable type by
qualified personnel.
- Before connecting the machine make
sure that the data indicated on the
plate correspond to those of the electric
supply.
- Do not use extensions to power the
high pressure washer.
If you use an extension, the plug and
socket must be watertight. Unsuitable
extensions may be dangerous.
- The electric safety of this machine
may be assured only when it is properly
connected to an efficient grounding
system in accordance with the governing
EN - english
GENERAL SAFETY RULES FOR
THE USE OF HIGH PRESSURE
CLEANERS
Warning
cannot be