Sortimo Jumbo-Unit HD Instrucciones De Uso página 13

Covering tray on Jumbo-Unit HD
Required tools
• Torque wrench 1-25 Nm,
• Hexagonal socket tool head A/F 6.
Required installation materials
)
1)
f • 4x required for installation.
• Included in installation kit
1000005114. Installation kit is
included in the covering tray
delivery.
1) The installation materials are shown at the
end of these instructions.
Prerequisites
- Jumbo-Unit HD is already fastened to a
floor panel or the vehicle floor.
Installation steps
Step 1: Secure covering tray 1033
▶ Position covering tray on Jumbo-Unit HD.
▶ Secure covering tray with screws f.
▶ Tighten screws f to 20 Nm.
Step 2: Fix divider g 1133
▶ Select the required installation position.
▶ Fix the retainers h in place.
▶ Push divider gdownwards between the
retainers h.
© Sortimo International GmbH
Divider in covering tray
Required installation materials
)
1)
g • 1x required for installation.
• Installation kit is included in the
scope of delivery of the divider set.
h • 2x required for installation.
• Installation kit is included in the
scope of delivery of the divider set.
1) The installation materials are shown at the
end of these instructions.
Prerequisites
- Covering tray is already fastened to a
Jumbo-Unit HD.
Installation steps
Step 1: Fix divider g 1133
▶ Select the required installation position.
▶ Fix the retainers h in place.
▶ Push divider gdownwards between the
retainers h.
English
13