SAKAWA AS15TE Manual Usuario página 82

Specs
Engin
e
Work capacity
Max, cutting power
Hydraulic oil capacity
Blade career
Forward speed
Backward speed
Noise level
Weig
ht
Troubleshooting and debugging
Problem
1. Engine won't start
2. The motor rotates in
the wrong direction.
3. The cracker does not
move even though the
engine is running.
4. The working machine
produces abnormal
noises and vibrations.
Diameter
Longitud
e
Longitud
e
Wide
Height
Possible Cause
1.1 There is no power in the plug.
1.2 Defective Cable.
1.4 Faulty Switch.
2.1 Inverted polarities.
3.1 The distributor does not open due
to poor connection of the levers.
3.2 Hydraulic fluid level too
low
4.1 Hydraulic fluid level too
low.
82
230V/ 50Hz/ 3000W/ IP54
30 cm
52 cm
15T
5L
480
mm
2.6 cm/sec
3.6
cm/sec.
88 dB(A) under
load
88 cm
42 cm
98 cm
116kg
Solution
1.1 Check the fuses.
1.2 Unplug and check the cable
1.4 Have it checked by an electrician.
2.1 Reversing polarity
2.2 Change polarities (electrician).
3.1 Tighten loose parts.
3.2 Fill it out
4.1 Fill it in.