Zipper Maschinen ZI-HS16E Instrucciones De Servicio página 35

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
D. Removing the support stand: Release both control
handles to retract the wedge ram. Remove the
support stand.
E. Mounting the guard arm: Align the hole and locking
pin of the guard arm with the mount bracket. Secure
the guard arm with a M10 × 40 hex bolts, two washers
and a nut from the hardware bag.
F. Mounting the retaining hook: Position the retaining
hook onto the frame and secure with two M10×35 hex
bolts and nuts.
ASSEMBLY
35