Yealink RoomPanel Manual De Instrucciones página 13

Step 5: Install the Security Latch (Optional)
Install the security latch to the RoomPanel so that it cannot be easily removed
from the mounting bracket after installation.
Step 6: Connect the Cable and Install the RoomPanel
5
Remove the RoomPanel
1. If the security latch has not be installed you can directly pull the RoomPanel to disengage the mounting
bracket.
2. If the security latch has be installed:
Use the release key to push down on the security bracket release tabs as shown in the following while pulling
the touch screen away from the mounting bracket.
10