Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
3
4
5
M1-M4
PRGMI
MANUAL
FREQUENCY
UP
FREQUENCY
DOWN
ENTER
MULTI JOG
Press FREQUENCY
UP or FREQUENCY
DOWN
to select a frequency.
The level indicator of the selected frequency flashes.
Turn MULTI JOG to adjust the level of the selected
frequency.
Repeat
steps
1 and 2 to make
the desired
equalization
curve.
Within 4 seconds,
press ENTER.
MEMORY is displayed for 8 seconds.
Within
8 seconds,
press
one of the graphic
equalizer
preset buttons
Ml -M4.
The equalization curve is stored.
The equalization curve has been memorised to Ml.
To select a manual-preset
GEQ
1 Press PRGM/MANUAL
to select the manual mode. One of
the MANUAL indicators is selected.
2 Press one of the graphic equalizer preset buttons Ml -M4.
To cancel the selected
mode
Press the selected button again. "GEQ OFF is displayed,
The DSP (Digital Signal Processor) SURROUND adjusts the
reverb level and delay time to give a resonant surround sound
during playback, allowing you to enjoy the real sound presence
of different environments.
This unit has been programmed with 4 different SURROUND
modes. You can also create and store up to 4 of your own
surround settings.
DSP
PRGMI
MANUAL
MANUAL
SELECT
SURROUND
When you select the programmed DSP SURROUND mode, the
sound presence of a disco (DISCO), live music performance
(LIVE), movie theater (MOVIE) or concert hall (HALL) can be
obtained.
Press PRGM/MANUAL
so that one of the PRGM indicators
is selected,
then press one of the DSP buttons.
PRGM indicator
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source
is monaural
Select LIVE or MOVIE to obtain a simulated stereo effect. When
DISCO or HALL is selected, no sound will be heard from the
surround speakers.
To cancel the selected
mode
Press the selected DSP button again. "DSP OFF is displayed.
To adjust the volume
of the surround
speakers
Press MANUAL SELECT twice or three times on the remote
control. "S-L" or "S-R" is displayed for 2 seconds. Press M
DOWN or PM UP on the remote control within these 2 seconds.
c The DOLBY PRO LOGIC (page 20) and the DOLBY DIGITAL
SURROUND
(page 27) surround
speakers
level is also
changed.
9
ENGLISH
Publicidad
