Descargar Imprimir esta página

Blackstone PRO Serie Manual Del Propietário página 11

Ocultar thumbs Ver también para PRO Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Models: 2026 • 2027 • 2028 • 2029 • 2063 • 2119
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Ensure
that all plastic packing material and any transit protection is removed
before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
S T E P 0 1
Remove the right leg
assembly from the packaging and
lay it on a smooth, flat surface.
Use the pre-installed bolts and
nuts on the wheels to install the
wheels to the bottom of the right
leg assembly.
S T E P 0 2
Remove the cart base
from the packaging and lay it upside
down on a smooth, flat surface.
Thread the wing screw into the
propane cradle.
S T E P 0 3
Use two (2) M6x12
screws to attach the right side of the
cart base to the right leg assembly.
Ensure that the grate panel holes are
oriented to the inside of the cart.
S T E P 0 4
Use two (2) M6x12
screws to attach the left side of the
cart base to the left leg assembly.
Ensure that the grate panel holes are
oriented to the inside of the cart.
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
grate panel
holes
grate panel holes
Assembly Guide
| Owner's Manual
!
!
WA R N I N G
WA R N I N G
• Do not mix old and new
The manufacturer has made
batteries.
every effort to eliminate any
sharp edges. However, you
• Do not mix alkaline, stan-
should handle all compo-
dard (carbon-zinc) or
nents with care to avoid
rechargeable (ni-cad, ni-mh,
accidental injury.
etc.) batteries.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
C A U T I O N
Two people are recom-
mended for the assembly of
!
WA R N I N G
this product.
• Do not mix old and new
batteries.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
rechargeable (ni-cad, ni-mh,
etc.) batteries.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
blackstoneproducts.com/support
Th
ev
sh
sh
ne
ac
So
sh
no
W
ne
Th
du
co
he
sis
da
Th
du
co
he
sis
da
07

Publicidad

loading

Este manual también es adecuado para:

Pro 2026Pro 2027Pro 2028Pro 2029Pro 2063Pro 2119