Owner's Manual |
Ignition | Piezo-Electric
!
WA R N I N G
Do not lean over the appli-
ance while lighting.
!
WA R N I N G
If ignition does NOT occur
in 5 seconds, turn burner
controls OFF, wait 5
minutes and repeat lighting
procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner and
could accidentally/inad-
vertently ignite with risk of
injury.
16
blackstoneproducts.com/support
IGNITION |
PIEZO -ELECTRIC
PROPANE BURNER OPERATION
For proper ignition and operation of the appliance follow the steps below.
S T E P 0 1
S T E P 0 1
Ensure that the LPG
Ensure that the gas
tank is properly connected to
regulator is angled towards the
rear of the appliance, and that the
the unit. Turn gas ON at the LPG
cylinder by slowly turning the OPD
LPG bottle is positioned below
handwheel halfway.
the regulator.
S T E P 0 2
❶ Push the control knob in to start
gas flowing.
❷ Turn the control knob counter-
clockwise to activate the starter.
❸ Adjust the temperature to
desired level.
Models: 2026 • 2027 • 2028 • 2029 • 2063 • 2119
one half turn
❶
❷
❸