Johnson JRT300-RDHV-S Manual De Instrucciones página 8

2. Remove battery compartment from
rotary laser. (Figure 12)
3. Remove each battery case from the
battery compartment.
4. Slide the covers off the battery
cases and insert three "AA" alkaline
batteries into each case according
to the polarity illustrated inside.
(Figure 13)
5. Reinstall the covers and reinsert
the battery cases into the battery
compartment. Be sure the end with
the openings is aligned with the
opening on the rear of the battery
compartment. (Figure 14)
6. Reinsert the battery compartment into
the rotary laser. (Figure 15)
8
Figure 12
Figure 13
Figure 14
Figure 15
©2023 Johnson Level & Tool