Symbols Used In The Manual; Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual - Fimap FM33 Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time
to elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements.
The reproduction, even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images are shown as a reference only, and
are not binding as to the actual design and/or equipment.
Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the manual before using the appliance.
Covered place symbol:
the operations preceded by this symbol must always be carried out in a dry, covered area.
Warning symbol:
Carefully read the sections marked with this symbol and observe the indications, for the safety of the operator and the
appliance.
Warning symbol that the carriage is moving:
Indicates that the packed product should be handled with suitable lifting means that comply with the legal requirements.
Explosion risk symbol:
indicates that the battery may explode in certain conditions, if not handled in accordance with the directives indicated in
the manufacturer's manual.
The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, most appropriate and most
autonomous way. It includes information concerning technical aspects, safety, operation, appliance downtime, maintenance, spare parts and
scrapping. Operators and qualified technicians must read the instructions in this manual carefully before carrying out any operation on the
appliance. If in doubt about the correct interpretation of instructions, contact your nearest Customer Service Centre to obtain the necessary
clarifications.
This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must not perform operations
that should be carried out by qualified technicians. FIMAP S.p.A. cannot be held liable for damages resulting from failure to comply with this
prohibition.
The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected from liquids and anything else that
could compromise its legibility.
When the machine is delivered to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping
documents has been received, in addition to verifying that the equipment has not been damaged during transportation. If this is the case, the
carrier must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the
missing material can be obtained, and compensation for damage successfully claimed.
Any type of equipment can only work properly and effectively if used correctly and kept in full working order by performing the maintenance
operations described in the attached documentation. You should therefore read this instruction manual carefully, consulting it again if
difficulties should arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with our
dealers) is always available for advice or direct intervention.

SYMBOLS USED IN THE MANUAL

Protective gloves symbol:
Always wear protective gloves, to avoid the risk of serious injury to your hands.

PURPOSE AND CONTENT OF THE MANUAL

TARGET GROUP

STORING THE USE AND MAINTENANCE MANUAL

ON DELIVERY OF THE APPLIANCE

INTRODUCTORY COMMENT

18

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido