Fimap FM33 Manual De Uso Y Mantenimiento página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Do not place any liquid containers on the appliance.
• In the event of a fire, use a powder extinguisher. Do not use
water.
• Adapt the speed to the adhesion conditions.
• Avoid using the brushes while the appliance is at a standstill, so
as not to damage the floor.
• Do not knock against shelving or scaffolding, where there is a
danger of falling objects. The operator must always be equipped
with the appropriate safety devices (gloves, shoes, helmet,
goggles, etc.).
• If the appliance does not work properly, check this is not caused
by failure to carry out routine maintenance. Otherwise, ask for
intervention of the authorised technical assistance centre.
• If you need to replace any components, request the ORIGINAL
spare parts from an Authorised dealer and/or Retailer.
• Restore all electrical connections after any maintenance
interventions.
• Have the appliance checked by an authorised technical
assistance centre every year.
• When disposing of consumable materials, observe the laws
and regulations in force. When, after years of valuable work,
your appliance needs to be finally decommissioned, dispose of
the materials contained in it appropriately, bearing in mind that
the appliance is made of fully recyclable materials.
• If the power supply cable gets damaged, the appliance must
be stopped if it is operating. Disconnect the plug from the
power supply, and have the cable replaced immediately by an
authorised service centre.
• Before using the appliance, check that all the hatches and
covers are positioned as shown in this Use and Maintenance
Manual.
• Only use the discs supplied with the device, or those specified in
the Instruction Manual. The use of other discs could compromise
safety levels.
22

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido