SOMFY Ysia 1 Zigbee Manual De Instrucciones página 9

Ysia 5 Zigbee Ysia 1 Zigbee
Insert the batteries type AAA LR03, 2 x 1.5 V, as indicated by
the polarity markings (+ and - signs) in the battery
compartment. The power supply terminals must not be
short-circuited.
3.5.Tips and advice on operation
3.5.1.Questions about the product?
Observations
The product does not operate (No LED reaction
when pressing the buttons)
NOTICE
If the product still does not operate, contact a drive and home automation professional.
3.5.2.Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.
4.TECHNICAL DATA
Frequency range used: 2.405 GHz - 2.480 GHz.
US and Canada maximum e.r.p.< 100 mW.
Other countries maximum e.r.p.< 10 mW.
The environment in which the product is used might reduce the radio range.
The use in the same room as the controlled products is recommended.
Radio range: 50 m in Free field (optimal condition).
NOTICE
Radio range can be extended depending on the network configuration.
Operating temperature: 0°C (+32°F) to +48°C (+118.4°F).
Power supply: Battery type AAA LR03, 2 x 1.5 V.
FCC: DWN-YSIA1, DWN-YSIA5
ISED: 12049A-YSIA1, 12049A-YSIA5
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
The control point battery is low.
3
1
2
4
Solutions
Change control point battery as
required.
EN
9