Publicidad
Idiomas disponibles
Idiomas disponibles
Installation, use and maintenance
5
GENERAL WARNINGS
Warnings
To ensure operator safety and to protect the dispensing system from potential damage,
workers must be fully acquainted with this instruction manual before attempting to oper-
ate the dispensing system.
Symbols used
The following symbols will be used throughout the manual to highlight safety information and
precautions of particular importance:
in the manual
ATTENTION
This symbol indicates safe working practices for operators and/or poten-
tially exposed persons.
WARNING
This symbol indicates that there is risk of damage to the equipment and/or
its components.
NOTE
This symbol indicates useful information.
Manual pres-
This manual should be complete and legible throughout. It should remain available to end
users and specialist installation and maintenance technicians for consultation at any time.
ervation
Reproduction
All reproduction rights are reserved by Piusi USA Inc.
The text cannot be reprinted without the written permission of Piusi USA Inc.
rights
© Piusi USA Inc.
THIS MANUAL IS THE PROPERTY OF Piusi USA Inc.
ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
This manual belongs to Piusi USA Inc., which is the sole proprietor of all rights indicated
by applicable laws, including, by way of example, laws on copyrights. All the rights deriv-
ing from such laws are reserved to Piusi USA Inc.: the reproduction, including partial, of
this manual, its publication, change, transcription and notification to the public, trans-
mission, including using remote communication media, placing at disposal of the public,
distri¬bution, marketing in any form, translation and/or processing, loan and any other
activity reserved by the law to Piusi USA Inc..
6
SAFETY INSTRUCTIONS
You must avoid any contact between the electrical power supply and the fluid
ATTENTION
Mains -
that needs to be FILTERED.
preliminary
checks before
inst
Maintenance
Before any checks or maintenance work are carried out, disconnect the
control
power source.
FIRE AND
Use equipment only in will ventilated area.
EXPLOSION
Keep work area free of debris, including rags and spilled or open containers of solvent
When flam-
and gasoline.
mable fluids
Do not plug or unplug power cords or turn lights on or off when flammable fumes are
are present
present.
in the work
area, such as
gasoline and
Ground all equipment in the work area.
windshield
Stop operation immediately if static sparking occurs or if you feel a shock. Do not use
wiper fluid,
equipment until you identify and correct the problem.
be aware that
Keep a working fire extinguisher in the work area.
flammable
fumes can
ignite or ex-
plode. To help
prevent fire
and explosion:
4 /48
M0204C
Publicidad
