Kingfisher FDP41-3080 ZPR5 Manual Del Usuario página 46

3. Screw the connector of window (C) into the air exhaust duct (A).
(anticlockwise)
4. Connect the connector of air exhaust duct (B) to the unit from top to bottom until it clicks into position.
If need to remove the hose please pull the connector of air exhaust duct (B) outward a bit, then slide the
connector from bottom to up.
Install Window Kit
B
B
1. Insert A board into B board according
to arrowhead direction. Insert the
plastic plug (C) into the hole to lock
the board A and B.
5059340368191_MNL_IN_V04.indd 46 5059340368191_MNL_IN_V04.indd 46
A
C
A
Fig. 1
Locking
system
2. Assembly finished as Fig 2 drawing
illustrated, consumer can adjust A
board up or down according to hight
of the window.
46
A
B
Fig. 2
30-11-2022 14:53:27 30-11-2022 14:53:27