Plug replacement
This appliance is supplied with a BS1363 3 pin plug with a 13 Amp
fuse. Should the fuse require replacement, it must be replaced with
a fuse rated at 13 Amp and approved to BS1362. In the event the
mains plug has to be removed/replaced for any reason, please note:
IMPORTANT: THE WIRES IN THE MAINS LEAD
ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue – Neutral
Brown – Live
Green/Yellow – Earth
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows. The blue wire must
be connected to the terminal marked
with an N or coloured black.
The brown wire must be connected to
the terminal marked with an L or coloured red.
The green/yellow wire must be connected to the earthing terminal
which is marked with an E or with the earth symbol.
WARNING: NEVER CONNECT LIVE OR NEUTRAL
WIRES TO THE EARTH TERMINAL OF THE PLUG.
NOTE: If a moulded plug is and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to
prevent engaging into a socket.
5059340368191_MNL_IN_V04.indd 9
5059340368191_MNL_IN_V04.indd 9
Green / Yellow - Earth
BLUE
Neutral
Cord
Clamp
9
BROWN
Live
FUSE
13 Amps
30-11-2022 14:53:22
30-11-2022 14:53:22