Publicidad
Idiomas disponibles
Idiomas disponibles
Menu structure
3.3.
pickling
brush
10V
POLISHING brush
10V
Black MARKING
12V
Regardless of the program selected, the – and + keys
can be used to increase or decrease the working voltage
(in 1-volt increments).
The default voltage level in the various operating
modes is that recommended by the manufacturer.
14
The display lights up when the main switch of the device is
brought to position "I"; this switch, colored green, is located
in the rear of the device (see chapter 2.4).
During startup, the WALTER logo and a screen with the
firmware information are briefly displayed on the screen.
The unit then moves on to the PICKLING BRUSH program.
To change the operating mode, press the MODE button.
pickling
PAD
28V
POLISHING PAD
18V
STAINLESS STEEL
ETCHING
12V
with a further press of the MODE button
the menu starts over again
Publicidad
