Walter SURFOX MAX Serie Manual Del Usuario página 16

4. MOUNTING ACCESSORIES ON THE DW WAND
During the installation of brushes, inserts and pads, the device must be switched off:
• Switch the main switch to the "O" position.
• Disconnect the device from the mains.
For its normal operation, the device requires the use of particular acid solutions that can be dangerous (read
chapter 1 carefully).
When replacing an accessory on the wand, be very careful of any electrolyte residues remaining on the brush
or pad.
Always use suitable protective gloves when mounting/removing wand accessories in order to:
• Reduce the risk of direct contact between skin and acid solutions.
• Obtain a certain level of protection from burns if the inserts are still too hot.
Overview of DW wand accessories
4.1.
2
5
54-B 617
1
54-B 618
2
54-B 149
3
54-B 604
4
54-B 605
5
54-B 009
6
54-B 043
7
54-B 180
8
54-B 607
9
54-B 608
10
54-B 609
11
WALTER C S
ustomer ervice
16
3
4
7
8
11
DW wand
Brush extraction tool
Brush adaptor
DW brush for Surfox MAX
DW sleeve
Graphite insert | 45 mm
SURFOX cleaning pad for graphite insert 45 mm
O-ring | 30 x 3.5
Graphite insert | 100 mm
SURFOX cleaning pad for graphite insert 100 mm
O-ring for graphite insert 100 mm
(walter.com) is available for any additional information.
6
9
10
1
included p. 16
included p. 18
included p. 17
included p. 18
included p. 18
optional p. 19
optional p. 19
optional p. 19
optional p. 20
optional p. 20
optional p. 20