Publicidad
Idiomas disponibles
Idiomas disponibles
shows the option to adjust the battery protection voltage. Increase or decrease the
voltage value using the + or - keys to the desired value. The default value is 21.5V.
Once the value has been chosen, wait 5 seconds and the change will take effect
with the display returning to the previously chosen temperature value (set-point).
Changes are made to the nearest tenth of a volt.
8. Cleaning and Basic
Maintenance
•Clean the appliance housing and inner panel with a damp cloth. Use neutral
detergent if necessary.
•Remove leaves, dirt, or any other type of object under the condenser that
may obstruct it, impairing the performance of the device and increasing energy
consumption. Be careful not to damage the condenser fins.
Condenser bottom view
•Check regularly that the appliance is securely attached to the roof of the vehicle.
•Regularly check that the main power cables are intact and securely fastened
and the terminals on the battery securely fastened. Also check that the central
cable connector is well coupled and that the 60Amp fuse and cables are securely
fastened.
The air inlet is behind and under
the appliance. Clean underneath,
between the ceiling and the
base of the appliance. Space is
restricted (minimum 25mm).
Frame
Dirt adhered to the fins of the
coil must be removed.
29
Publicidad
