RS Pro RS-9968BT Manual De Instrucciones página 5

Professional True RMS Digital Multimeter with OLED display / English
9. Symbols Used on LCD display
V
Volts
A Amperes
~ Alternating voltage and current
Direct voltage and current
+
(Alternating+ Direct) voltage
Minus sign
Ω Ohms
Continuity
Diode test
F Farads (capacitance)
Hz Hertz (frequency)
%
Percent (duty ratio)
°F Degrees Fahrenheit
°C Degrees Centigrade
n nano (10 -9 )
µ -6
micro (10 )
-3
m milli (10 )
k kilo (10 3 )
M mega (10 6 )
OL
Overload
Auto Power Off
Battery Indicator
LOG M
Manual data Memory
LOG A Automatic data Memory
AUTO Autoranging
HOLD Display hold
MAX/MIN/AVG Maximum/Minimum/Average
PMAX/PMIN PMAX/PMIN hold
Relative
Bargraph display
Bluetooth
8
10. RANGE/- button
The Autorange mode automatically selects the proper range for the measurement being made
and is generally the best mode for most applications. For measurement situations requiring
that a range be manually selected, perform the following:
1. Momentarily press the RANGE/- button. The "AUTO" indicator will no longer be shown
on the LCD display.
2. Momentarily press the RANGE/- button to step through the available ranges until the
desired range is selected.
3. To exit the Manual Ranging mode, press and hold the RANGE/- button until the "AUTO"
indicator reappears.
4. "-" reduce value.
5. IN the data logger mode, press the RANGE/- button, the time interval of the automatic
storage record is reduced.
6. In time and date settings, press the RANGE button, the number of flickering will be
reduced.
7. In 3000A Current AC position Press the RANG key to select "30A. 300A. 3000A".
NOTE:The range botton does not work on Frequency, Duty Cycle, Continuity, Diode test
P(3)
4-20mA% and Temperature.
11. MODE/Bluetooth Button
Momentarily press the MODE
Continuity or Diode Test and °C or °F.
Bluetooth allows readings to be displayed and stored on mobile devices. To activate
Bluetooth, press and hold the MODE
display. Bluetooth should be disabled when not connected to a mobile device in order to
conserve battery power. To turn off Bluetooth, press and hold the MODE
" " symbol no longer appears on the display.
In DC Voltage test mode ,press MODE button to select "AC+DC" function measures.
The AC + DC function measures both the AC and DC components to derive the effective
RMS (AC+DC) value. The AC+DC mode is typically used when measuring voltage on
unfiltered rectifier circuits. To activate, press and hold the MODE button until "AC + DC"
appears on the LCD display.
Professional True RMS Digital Multimeter with OLED display / English
button to select AC, Frequency or Duty Cycle, Resistance,
button until the " " symbol appears on the LCD
button until the
9